
How to Inflate Air Mattress With Hair Dryer?
It’s happened to everyone at some point – you go to inflate your air mattress, and the pump just isn’t working. Or, you’re out camping and don’t have a pump handy. Luckily, there’s an easy way to inflate your mattress without a pump – all you need is a hair dryer!
how to inflate air mattress without pump
- Plug in your hair dryer and set it to the highest heat setting
- Place the nozzle of the hair dryer at the valve on the air mattress and turn it on
- Hold the nozzle in place for a few minutes until you feel the mattress start to inflate
- Move the nozzle around the valve so that you evenly distribute the heat and prevent any one spot from getting too hot
- Once the mattress is inflated to your desired level, turn off the hair dryer and remove it from the valve
How to Inflate Air Mattress Without Electricity
It can be quite frustrating when you want to use an air mattress but don’t have access to electricity. Luckily, there are a few ways that you can inflate your air mattress without using any power. Here are a few methods that you can try:
1. Use a manual pump: This is the most common way to inflate an air mattress without electricity. You can purchase a hand pump at most stores that sell camping gear. Simply attach the pump to the valve on the air mattress and start pumping away!
2. Use your breath: If you don’t have a hand pump, you can try inflating your air mattress with your breath. It will take some time and effort, but it is possible to do it this way. Start by opening the valve on the air mattress and then put your mouth over it.
Blow into the valve until the mattress starts to inflate.
3. Use a bike tire Pump: If you have a bike tire pump, you can use that to inflate your air mattress as well. Simply attach the pump to the valve on the air mattress and start pumping away!
This method may take some time, but it will eventually work.
4. Use compressed air: If you have access to compressed air (from an Air Compressor), you can use that to quickly inflate your air mattress as well.
How to Inflate Air Mattress With Built-In Pump
Assuming you have an air mattress with a built-in pump, there are only a few steps to take in order to inflate it. First, find an outlet and plug in the cord attached to the pump. Once the pump is plugged in, locate the inflation valve on the mattress – it will likely be located near the center of one of the sides.
There will be a small cap covering this valve – remove the cap and insert the nozzle of the pump into the valve. Make sure that it’s snugly inserted so that no air is escaping.
Once everything is set up, simply turn on the pump by flipping the switch (if there’s a switch) or pressing the button (if there’s a button).
The mattress will begin inflating automatically. Depending on how big your mattress is, it may take anywhere from 2-10 minutes to fully inflate. You’ll know it’s done when firmness reaches its peak and then starts decreasing slightly – at this point, you can stop pumping.
Remove nozzle from valve and replace cap. And that’s it! Your air mattress is ready for use.
How Do You Inflate an Air Mattress With a Built-In Pump Without Electricity
If you find yourself without electricity and in need of an inflated air mattress, there are a few ways to do it. If you have a gas stove, you can light the stove and place the mouth of the air mattress over the flame. The heat will cause the air inside the mattress to expand, inflating it.
You can also use a bicycle pump if you have one handy. Simply insert the nozzle of the pump into the valve on the air mattress and start pumping. It may take a while, but eventually, your mattress will be inflated.
Another option is to blow into the valve yourself. This might take a while as well, but it will get the job done!
How to Inflate Bestway Air Mattress With Built-In Pump
Assuming you have a Bestway air mattress with a built-in pump, here are detailed instructions on how to inflate it:
1. Plug the power cord into an outlet and make sure the switch is in the “on” position.
2. Place the air mattress on a flat surface.
3. Insert the inflation nozzle into the valve at the bottom of the mattress. Make sure it’s snug so there’s no air leakage.
4. Press down on the inflation pump to start inflating the mattress.
The pump will automatically shut off when the mattress is fully inflated (usually takes about 3-5 minutes).
How to Inflate Air Mattress With Bike Pump
Assuming you have a Coleman air mattress and a bike pump with a Schrader valve attachment, follow these steps to inflate your mattress:
1. Open the inflation port on your mattress and screw on the bike pump adapter. Make sure the adapter is screwed on tightly.
2. Insert the bike pump nozzle into the adapter and start pumping.
3. Pump until the mattress is firm to your liking. You may need to add more air after sleeping on it for awhile as it will soften slightly overnight.
4. Once you’re finished inflating, unscrew the adapter from the mattress and put everything away until next time!

Credit: www.instructables.com
Can You Air Up a Air Mattress With a Hair Dryer?
You can air up a air mattress with a hair dryer as long as the hair dryer has enough power. Most hair dryers have at least 1875 watts of power, which is more than enough to inflate a air mattress. Just remember to hold the hair dryer close to the valve and keep moving it around so that the heat is evenly distributed.
What is the Fastest Way to Inflate an Air Mattress?
Assuming you don’t have an air pump, the fastest way to inflate an air mattress is by using your own breath. To do this, open the valve and start blowing into it until the mattress is fully inflated. This will take some time and effort, but it’s the quickest way to do it without a pump.
If you have an air pump, simply attach it to the valve and turn it on. Most pumps will inflate a mattress in just a few minutes.
How Can I Pump My Air Mattress Without Electricity?
If you don’t have access to an electrical outlet, you can still pump up your air mattress using a manual hand or foot pump. Some air mattresses come with a built-in manual pump, while others require an external one. If your air mattress didn’t come with a manual pump, you can purchase one at most sporting goods stores or online retailers.
To use a manual pump, simply insert the nozzle of the pump into the valve on the air mattress and start pumping. It may take a few minutes of continuous pumping to fully inflate the mattress. Once it’s inflated, remove the nozzle from the valve and close it tightly to prevent air from escaping.
How Do You Pump an Air Mattress by Yourself?
An air mattress is an inflatable mattress, which means you can use a pump to fill it with air. However, if you don’t have a pump, there are other ways to fill your mattress. Here’s how to do it:
1. Find a source of air. This could be an electric fan, a hair dryer, or even just your mouth.
2. Place the mattress on the ground and open up the valve that allows air to enter the mattress.
3. Hold the end of the valve close to your chosen source of air and start blowing into it. The mattress will start to fill up with air and will become more firm as you continue blowing into it.
4. Once the mattress is full, close the valve so that no more air can escape from it.
Your mattress is now ready to use!
Conclusion
Inflating an air mattress with a hair dryer is easy and only takes a few minutes. All you need is the hair dryer, the air mattress, and an adapter if necessary. First, make sure that the air mattress is clean and free of any debris.
Next, connect the hair dryer to the air mattress using the adapter if necessary. Then, turn on the hair dryer and hold it close to the air intake valve on the air mattress. Finally, watch as the air mattress inflates quickly and easily!

